Cationic modifier K67

阳离子改性剂k67.jpg

Ⅰ、Product introduction

Cationic modifier K67 is an important organic synthesis intermediate. The product contains ≥ 65% of active substances at room temperature. It can be immediately converted into epoxide, which is widely used for cationic modification of starch, guar gum, cellulose, etc.

Ⅱ、Product performance index

ItemSpecifications
AppearanceColorless transparent liquid
Active substance content≥65%
PH Value4-7(10% solution)
Freezing crystallization point≤ -10℃
1,3—Dichloropropanol≤ 10PPM
Epichlorohydrin≤5 PPM
Solubility

Easily soluble in water, soluble in lower alcohols,

 insoluble in weak polar solvents such as hydrocarbons and ethers

Ⅲ、 Product features

1.The product appearance is transparent liquid with low impurity content, less than 20PPM;

2.Adopt advanced continuous production technology, and the product quality is stable;

3.High product reaction efficiency, up to 90%.


Ⅳ、 Scope of application

1.Paper industry

Cationic modifier K67 is an important auxiliary in paper industry, which is widely used in chemical modification of starch, cellulose, chitosan, etc.


2.Textile industry

The cotton fiber modified by cationic modifier K67 improves its adhesion to dyes; Cationic starch obtained by reacting with starch can be used as warp sizing agent.


3. Water treatment industry

The suspended solids in water are negatively charged, and the cationic polymer formed by reacting with cationic modifier K67 is widely used in water purification as a flocculant.


4.Daily chemical industry

Cationic guar gum modified by cationic modifier K67 is an important daily chemical.


Ⅴ、 Matters needing attention

1.If crystals appear before use (in winter), please heat and stir  to dissolve them.

2.If it gets into eyes, please wash it with water for 15 minutes immediately and then go to a doctor.

3.Storage conditions: sealed and stored in a cool, ventilated and dry place.


Ⅵ、Packaging specification

125 kgs plastic drum; IBC ton barrel; Liquid bag.


※ This content is formulated according to the current laboratory conditions, existing experimental data, etc. The recorded data and relevant evaluation are only for reference. Customers are requested to conduct necessary experimental confirmation before use.